![]() One thing that might be worth a look - perhaps run NirSoft USBDeview. One question I'm curious to ask - though it probably doesn't help to know - is the 10 minute time-out set in the OS power management, or is it an integral function of the external drives' themselves? It only does this with the HP, not the Dell. ![]() So, I reset both of these things to the defaults that they were at before I played with them.Īll of this is particularly perplexing because while the computer is on, but I have not accessed the phd for 10+ minutes the phd normally goes into sleep mode (disk stops spinning, light slowly blinks), but if I then put the computer to sleep the phd spins up, the light comes on steady, and it stays that way even if hours go by while the computer is asleep. Just to see what would happen I disabled USB selective suspend setting to see if anything changed. ![]() Hybrid sleep is really only intended for desktop PCs - not for laptops, which rarely suffer unexpected power loss (because they run off batteries). disc or SSD) in case there was power loss whilst 'sleeping'. Unfortunately, the phd still acts like it does with sleep, not like it does with hibernation.įor most practical purposes 'Hybrid Sleep' is just regular 'Sleep', but with the added insurance of a 'Hibernation File' also written to a non-volatile storage (i.e. The Allow hybrid sleep setting was worth a try since it is sort of a hybrid of sleep and hibernation. Below you can see what they were set to (defaults). I only found 2 items that might be relevant: Sleep|Allow hybrid sleep and USB settings|USB selective suspend setting. The new box that comes up has all kinds of settings that relate to power to the usb ports and when to turn off hard drives In the computer which is not behaving you can explore control panel/power options and click on change advanced power settings.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |